DA-FDB-24C-PA-2-X Fiber Optic Distribution Box for FTTH

No

Item

Specification

1

Boxes Size(mm)

325(L)×275(W)×100(H)

2

Working temperature

-10℃～+70℃

3

Design

·       Inside the box is designed with all the basic connection components, including: Splice tray, panel adapter + adapter, splitter module slot, optical fiber cable guide, heat shrink tube and components to store input/output optical cables (rouding roller, hook/loose tube holder, optical fiber cable, pigtail...).

·       Has a structure that firmly holds the reinforcing wire; guide rings, optical fiber tube ties, separate cable in/out paths and a cable collar fixing mechanism to ensure safety

·       Has a sturdy structure to hold the drop cable fixed in the box, pigtail to the Splice tray, pigtail to the adapter panel.

·       Design with slot for fixed 02 Splitter module PLC 1:8 or 01 Splitter module PLC 1:16.

·       Guide ring for Splitter’s pigtail Separate make sure install and remove splitter not effect to other component

·       All Splitter’s pigtail install inside the box out of Splice tray with bending radius ≥ 30mm with protect tube

4

Lock and door

The box door has a sturdy design, uses rubber gaskets, does not break when stretched, and ensures a tight seal of IP54 level

The box door is connected to the box body by a multi-ear hinge, along the length of the box body

The box door opening angle is 180^o

The lock is sturdy, made of chrome-plated zinc, and is corrosion-resistant

It has a special key design to open (it cannot be opened with a flat screwdriver or other types of keys).

It has a dust-proof and waterproof cover

It has 2 clamp to close the box door tightly

·       Other metal components are made of stainless steel

·       The inside of the box door has a board attached to record connection information and customer information.

5

Cable Input and Output Ports

·       02 Main input ports support Midspan cable

      Support cable with capacity up to 16FO, 24FO

·       02 branch port for cable up to 12FO

·       24 ports for 2x3mm drop cable output or loose tube drop cable with comp slot to fixed

·       At the optical cable connection ports, there is a sturdy structure to fix the cable and reinforcing wire. And there is a gasket or rubber cover to prevent dust, water and insects from entering the box.

·      

6

Grounding

The box is designed with a grounding connection point at the bottom of the box and connected to the optical cable fixing component with a copper wire with a cross-section of 2.5mm2.

7

Material

·       Thickness ≥ 3 mm ABS (No fiberglass)

·       The box cover is molded from high-quality, smooth, one-piece plastic without burrs. It is durable, resistant to impact, scratches, high temperatures, and corrosion from chemicals, and does not yellow or fade due to UV rays

8

Color

Milky white

9

Standard compliance

UV Resistant

IEC 60068-2-5:2010

Fire resistance

UL94V0

Weather resistance

ASTM G151, ASTM G155

10

Adapter panel

·       01 panel with distance between adapters can be easily manipulated to plug and unplug connectors or replace adapters.

·       Panel adapter allows installation of 24 SC adapters

The hinges and pins connecting the adapter panel to the box body ensure firmness, durability, easy opening and closing, and can be removed from the box body.

The splitter module installation slot is arranged to ensure convenience for optical pigtail of the splitter, meeting the requirements for bending radius> 30mm

The adapters are plugged in the same direction, avoiding direct laser emission into the user's eyes and are numbered to match the adapter order (from inside to outside, from top to bottom).

Labels with clear numbers, no peeling, no water absorption, firmly attached or printed directly on the adapter panel

Panel Adapter support for connect fast connector with bending of drop cable> 30mm

11

Adapter

Box type

Number of Adapter

Note

Splitter box 1x 8

9

Optional

Splitter box 1x 16

17

Optional

OTB 12FO

12

Optional

OTB 24FO

24

Optional

·       Adapter SC/APC type with a one-piece molded shell made of high-quality engineering plastic with a stainless steel latch that allows for a secure attachment to the adapter panel

·       The tube placed inside the adapter is made of Zirconia Ceramic, connected to a plastic latch.

·       Connect standard: SC-SC

·       Color Green

·       Working temperature: -10℃～+65℃, Adapter with dust cap at both side

·       IL ≤ 0,3 dB

·       Plug - Pull life: ≥ 500 times

12

Pigtail

Box type

Number of Pigtail

Note

Splitter box 1x 8

2

Optional

Splitter box 1x 16

2

Optional

OTB 12FO

12

Optional

OTB 24FO

24

Optional

·       Connector type: SC/APC-8^o with dust cap

·       Fiber G.652D or G.657A1

·       Splicing IL ≤ 0,1 dB

·       Pigtail Diameter: 900µm ± 50µm

·       Length >1000 mm, with connector with dust cap

-       Outer pigtail sheath made of PVC or LSZH

-       IL: ≤ 0,3 dB

-       RL: ≥ 60 dB

-       Connected 500 times: IL change ≤ 0,1 dB

-       Working temperature: -10℃～+65℃

-       Humidity: ≤ 95% RH

13

Splicing Tray (ABS)

Box type

Splicing

Note

Splitter box 1:8 and 1:16

Number of Splicing = total input and output port of Splitter + 12Fo

Optional

OTB 12FO

24

Optional

OTB 24FO

48

Optional

Make of ABS Plastic

- Splice tray of input, output cable separate with splice tray of drop cable

- 24 slots for install sleeve tube/ 1 tray

- Input tray support 6 loose tube

- Output tray support 6 loose tube

- Comp slot high > 5mm can fixed sleeve tube 60mm make sure not effect to fiber, no effect to other sleeve tube

The Splice trays are firmly connected together and can be disassembled to expand the capacity; the connect are at the horizontal corners of the Splice tray. Each Splice tray has its own transparent plastic cover with a label identifying the order of the optical fibers following EIA/TIA-598

The space inside the Splice tray allows storage of optical fibers up to 1.2m in length and ensures that the minimum bending radius of the optical fiber is always > 30mm. The mounting position is designed to securely hold 01 naked splitter (a type of splitter with input and output being optical fibers without connectors).

The in/out port of the Splice tray is designed to allow the use of plastic tie to fixed loose tubes and Pigtail

14

Sleeve tube

Box type

Number of Sleeve tube

Note

Splitter box 1x 8

2

Optional

Splitter box 1x 16

2

Optional

OTB 12FO

12

Optional

OTB 24FO

24

Optional

-Length: 60 mm ± 3mm

-Inner tube: Ethylene Vinyl Acetate

Diameter inside: 1.3 ÷ 1.5 mm

Thickness : 0.3 ÷ 0.5 mm

-Outer tube: Polyolefin

Diameter inside: 2.0 ÷ 3.0 mm

Thickness : 0.15 ÷ 0.25 mm

-Stainless steel strength member

Diameter : 1 ÷ 1.5 mm

Thickness : 54 ÷ 56 mm

-Heat shrink temperature : 90°C ÷ 120°C

-Radial heat ratio : ≥ 50%

IL change ≤ 0,05dB after heating at 1550nm

No.

Name of accessories

Unit

Quantity

1

Fiber Optic Distribution Box

piece

1

2

Installation Instruction Sheet

piece

1

3

Key

piece

1

4

Insulation Tape

Roll

1

5

Cable Tie 10cm

pieces

5

6

Twisted Plastic Pipe 2m

piece

1

7

Steel ring for cable

pieces

4

8

Back Bracket distance 70÷105mm between 2 bracket

pieces

2

9

Stainless Steel Belt 2 x  (1.3 m, width x thickness = 20 mm x 0.4 mm) and Belt Buckle with lock

sets

2

10

Accessories for wall mount

Screw and expansion screws included in the box

pcs

4