4 Core Fiber Optic Distribution Box

Dawnergy’s fiber optic distribution boxes are widely used as a termination point for the feeder cable to connect with the drop cable in the FTTx communication network system. The fiber splicing, splitting and distribution can be done in these boxes. These series of boxes provide solid protection and management for the FTTx networks.

Features:

• Total enclosed structure.
• Material: PC+ABS, wet-proof, water-proof, dust-proof, anti-aging, protection level up to IP65.
• Clamping for feeder cable and drop cable, fiber splicing, fixation, storage, distribution etc. all in one.
• Cable, pigtails, patch cords are running through own path without disturbing each other, cassette type SC adaptor installation, easy maintenance.
• Distribution panel can be flipped up, feeder cable can be placed in a cup-joint way, easy for maintenance and installation.
• Cabinet can be installed by the way of wall-mounted or poled-mounted, suitable for both indoor and outdoor uses.

Specification:

1. Environmental requirement Working temperature: -40℃～+85℃ Relative humidity: ≤85% (+30℃)

Atmospheric pressure: 70KPa～106Kpa

2. Main technical datasheet Insertion loss: ≤0.2dB

UPC return loss: ≥50dB APC return loss: ≥60dB

Life of insertion and extraction: ＞1000 times

3. Thunder-proof technical datasheet

The grounding device is isolated with the cabinet, isolation resistance is less than 1000MΩ/500V (DC);

IR≥1000MΩ/500V;

The withstand voltage between grounding device and cabinet is no less than

3000V(DC)/min, no puncture, no flashover, U≥3000V

Configuration table:

Table 1 Model and configuration

Pic 1 Box Size Pic 2 Installation Size

Product cable ways:

Pic 3 Cable ways

1. Base;
2. Main cable mound layer;
3. water-proof rubber tube;