DA-FDB-6C-PA-X Fiber Optic Distribution Box
I. Description
Dawnergy’s fiber optic distribution boxes are widely used as a termination point for the feeder cable to connect with the drop cable in the FTTx communication network system. The fiber splicing, splitting and distribution can be done in these boxes. These series of boxes provide solid protection and management for the FTTx networks.
II. Feature
· Used for outdoor or indoor installation, near the sea or underground
· Suppport pole mount with round and square pole (02 steel belts and 02 clamp stainless steel) and wall mounting with 02 bolts
· The back of the box is designed with a stainless steel/powder coated iron clamp to thread the stainless steel belt to fix the box on the information pole, power pole to ensure the box is sturdy and does not warp.
· The box body is molded from high quality ABS plastic in one piece, smooth, without burrs. Material ABS with UV resistant IEC 60068-2-5:2010 does not yellow or fade due to UV rays, water-proof, dust-proof, anti-aging. Highly durable, resistant to impacts, scratches, high temperatures and corrosion caused by chemicals.
III. Application
l FTTH access networks
l Telecommunication networks
l CATV networks
l Local Area Networks
IV. Specifications
No |
Item |
Specification |
||||||
1 |
Boxes Size(mm) |
186(L)×114(W)×40(H) |
||||||
2 |
Working temperature |
-10℃~+70℃
|
||||||
3 |
Design |
· Inside the box is designed with all the basic connection components, including: Splice tray, panel adapter + adapter, splitter module slot, optical fiber cable guide, heat shrink tube and components to store input/output optical cables (rounding roller, hook/loose tube holder, optical fiber cable, pigtail...). |
||||||
· Has a structure that firmly holds the reinforcing wire; guide rings, optical fiber tube ties, separate cable in/out paths and a cable collar fixing mechanism to ensure safety
|
||||||||
· Has a sturdy structure to hold the drop cable fixed in the box, pigtail to the Splice tray, pigtail to the adapter panel. |
||||||||
· Design with slot for fixed 01 Splitter module PLC 1:4 with output connector SC · Guide ring for Splitter’s pigtail Separate make sure install and remove splitter not effect to other component · All Splitter’s pigtail installation inside the box out of Splice tray with bending radius ≥ 30mm with protect tube
|
||||||||
4 |
Lock and door |
The box door has a sturdy design, uses rubber gaskets, does not break when stretched, and ensures a tight seal of IP54 level
|
||||||
The box door is connected to the box body by a multi-ear hinge, along the length of the box body The box door opening angle is 180o
|
||||||||
The lock is sturdy, made of chrome-plated zinc, and is corrosion-resistant It has a special key design to open (it cannot be opened with a flat screwdriver or other types of keys).
It has 2 clamp to close the box door tightly Other metal components are made of stainless steel
|
||||||||
· The inside of the box door has a board attached to record connection information and customer information. |
||||||||
5 |
Cable Input and Output Ports |
· 01 Main input ports · 01 branch port · Support Midspan cable · 6 ports for 2x3mm drop cable output or loose tube drop cable with comp slot to fixed · At the optical cable connection ports, there is a sturdy structure to fix the cable and reinforcing wire. And there is a gasket or rubber cover to prevent dust, water and insects from entering the box. |
||||||
6 |
Grounding |
The box is designed with a grounding connection point at the bottom of the box and connected to the optical cable fixing component with a copper wire with a cross-section of 2.5mm2.
|
||||||
7 |
Material |
· Thickness ≥ 2 mm ABS (No fiberglass) · The box cover is molded from high-quality, smooth, one-piece plastic without burrs. It is durable, resistant to impact, scratches, high temperatures, and corrosion from chemicals, and does not yellow or fade due to UV rays |
||||||
8 |
Color |
Milky white or gray |
||||||
9 |
Standard compliance |
UV Resistant |
IEC 60068-2-5:2010 |
|||||
Fire resistance |
UL94V0 |
|||||||
Weather resistance |
ASTM G151, ASTM G155 |
|||||||
10 |
Adapter panel |
01 panel with distance between adapters can be easily manipulated to plug and unplug connectors or replace adapters. Panel adapter allows installation of 06 SC adapters |
||||||
The hinges and pins connecting the adapter panel to the box body ensure firmness, durability, easy opening and closing, and can be removed from the box body. |
||||||||
The splitter module installation slot is arranged to ensure convenience for optical pigtail of the splitter, meeting the requirements for bending radius> 30mm |
||||||||
The adapters are plugged in the same direction, avoiding direct laser emission into the user's eyes and are numbered to match the adapter order (from inside to outside, from top to bottom). Labels with clear numbers, no peeling, no water absorption, firmly attached or printed directly on the adapter panel |
||||||||
Panel Adapter support for connect fast connector with bending of drop cable> 30mm |
||||||||
11 |
Adapter |
Box type |
Number of Adapter |
Note |
||||
Splitter box 1x 4 |
5 |
Optional |
||||||
OTB 4FO |
4 |
Optional |
||||||
· Adapter SC/APC type with a one-piece molded shell made of high-quality engineering plastic with a stainless steel latch that allows for a secure attachment to the adapter panel · The tube placed inside the adapter is made of Zirconia Ceramic, connected to a plastic latch. · Connect standard: SC-SC · Color Green · Working temperature: -10℃~+65℃, Adapter with dust cap at both side · IL ≤ 0,3 dB · Plug - Pull life: ≥ 500 times |
||||||||
12 |
Pigtail |
Box type |
Number of Pigtail |
Note |
||||
Splitter box 1x 4 |
2 |
Optional |
||||||
OTB 4FO |
4 |
Optional |
||||||
· Connector type: SC/APC-8o with dust cap · Fiber G.652D or G.657A1 · Splicing IL ≤ 0,1 dB · Pigtail Diameter: 900µm ± 50µm · Length >1000 mm, with connector with dust cap - Outer pigtail sheath made of PVC or LSZH - IL: ≤ 0,3 dB - RL: ≥ 60 dB - Connected 500 times: IL change ≤ 0,1 dB - Working temperature: -10℃~+65℃ - Humidity: ≤ 95% RH |
||||||||
13 |
Splicing Tray (ABS) |
Box type |
Splicing |
Note |
||||
Splitter box 1x 4 |
5 |
Optional |
||||||
OTB 4FO |
6 |
Optional |
||||||
Make of ABS Plastic - Splice tray of input, output cable separate with splice tray of drop cable - 12 slots for install sleeve tube/ 1 tray - Comp slot high > 5mm can fixed sleeve tube 60mm make sure not effect to fiber, no effect to other sleeve tube
|
||||||||
The Splice trays are firmly connected together and can be disassembled to expand the capacity; the connect are at the horizontal corners of the Splice tray. Each Splice tray has its own transparent plastic cover with a label identifying the order of the optical fibers following EIA/TIA-598 |
||||||||
The space inside the Splice tray allows storage of optical fibers up to 1.2m in length and ensures that the minimum bending radius of the optical fiber is always > 30mm. The mounting position is designed to securely hold 01 naked Splitter (a type of splitter with input and output being optical fibers without connectors).
|
||||||||
The in/out port of the Splice tray is designed to allow the use of plastic tie to fixed loose tubes and Pigtail |
||||||||
14 |
Sleeve tube |
Box type |
Number of Sleeve tube |
Note |
||||
Splitter box 1x 4 |
2 |
Optional |
||||||
OTB 4FO |
4 |
Optional |
||||||
-Length: 60 mm ± 3mm -Inner tube: Ethylene Vinyl Acetate Diameter inside: 1.3 ÷ 1.5 mm Thickness : 0.3 ÷ 0.5 mm -Outer tube: Polyolefin Diameter inside: 2.0 ÷ 3.0 mm Thickness : 0.15 ÷ 0.25 mm -Stainless steel strength member Diameter : 1 ÷ 1.5 mm Thickness : 54 ÷ 56 mm -Heat shrink temperature : 90°C ÷ 120°C -Radial heat ratio : ≥ 50% IL change ≤ 0,05dB after heating at 1550nm
|
||||||||
V. Logo and Maker
ü Customer logo is printed on the outside and in the upper right corner of the box. customize if requirement
Example logo customer:
ü Label in the product: Manufacture
Product type
Production time (Year / Month)
Contract information as customer requirement
Print on the good material, non-fading
VI. Standard Package
No. |
Name of accessories |
Unit |
Quantity |
1 |
Fiber Optic Distribution Box |
piece |
1 |
2 |
Installation Instruction Sheet |
piece |
1 |
3 |
Key |
piece |
1 |
4 |
Insulation Tape |
Roll |
1 |
5 |
Cable Tie 10cm |
pieces |
5 |
6 |
Twisted Plastic Pipe 30cm |
piece |
1 |
7 |
Screw for wall mount |
sets |
2 |
8 |
Back Bracket |
pieces |
1
|
9 |
Stainless Steel Belt 12.7mm*0.4mm*1.3M steel belt +2 buckles |
sets |
2 |
VII. Ordering Information
Product |
Description |
Product code |
Splitter Plastic box 1: 4 SC/APC |
· 01 cover box: DA-FDB-6C-PA-X · 05 Adapter SC/APC · 02 pcs Sleeve tube · 02 Pigtail SC/APC length >1000mm, diameter 0.9mm, LSZH · 01 Splice tray (5 splicing) with Slot for naked Splitter · 01 Slot for PLC Splitter 1:4 · 01 main port · 01 branch port · 04 drop cable port |
DA-FDB-6C-PA-1x4
|
OTB Plastic box 4FO SC/APC |
· 01 cover box: DA-FDB-6C-PA-X · 04 Adapter SC/APC · 04 pcs Sleeve tube · 04 Pigtail SC/APC length >1000mm, diameter 0.9mm, LSZH · 01 Splice tray (5 splicing) with Slot for naked Splitter · 01 Slot for PLC Splitter 1:4 · 01 main port · 01 branch port · 04 drop cable port |
DA-FDB-6C-PA-4FO
|
Contact Us at Any Time