The equipment is widely used as a termination point for the feeder cable to connect with drop cable in FTTH network, telecommunication network, CATV network, data network and local area network etc.. The fiber fixing, stripping, splicing, splitting and jumper can be done in this box, can be used indoor and outdoor.
Features:
Specification:
1.Environmental requirement
Working temperature:-40℃~+85℃
Relative humidity:≤85%(+30℃)
Atmospheric pressure:70KPa~106Kpa
2.Main technical datasheet
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3.Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation resistance is less than 2x10⁴MΩ/500V(DC);IR≥2x10⁴M Ω/500V
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover;U≥3000V
Configuration table
Table 1 Model and configuration
Model | Description | Size(Pic 1) | Max Capacity | Installation Size(Pic 2) | ||
A*B*C(mm) | SC | LC | PLC | D*E (mm) | ||
DA-FDB-2B-PA-1 | Distribution Box | 120*170*30 | 2 | 4 | 4(LC) | 159*80 |
Product inside structure and cable ways:
Installation:
1.Wall-mounted installation
Drill 3 holes over the wall based on the size in table 1,place the expansion bolt Φ5.5*30,place the box to match up the holes and use bolt to fasten.
Accessories:
1. Users' Manual*1.
2. Key*1.
3. Accessories Bag * 1
Contact Us at Any Time