DA-ODU48-SC-D 2U ODF Unit Distribution Type
Dawnergy’s rotating type rack-mount fiber optic ODF unit are widely applied in Local Central Office. These are used for fiber optic cable fixation, protection, cable termination, patching etc. 19-inch rack mount for SC adapters. Max up to 48cores. The drawer is the holding board only for adapters distribution, easy to withdraw the fibers when testing and distributing.
ODF Distribution Module Specifications
|Minimum radius bending of fiber in/out
|Material of Box , and panel adapter
|Low carbon steel (mild steel), powder coated, Light Grey color
|Dimensions (mm) (W x D x H)
|480 x 260 x 2U ( use for rack 19inch standard)
Splicing Type ODU
Adapter Specifications ( Dawnergy’s product)
|Cold rolled steel,powder coated
|SC/UPC with dust cap
|Housing make of plastic, and core make of Zirconia
|Insertion Loss (dB)
|500 times plugging
|Operating Temperature (°C)
|-40 ~ +85
|Storage Temperature (°C)
|-40 ~ +90
Full accessories for 48FO, Adapter SC/UPC, all product made from Dawnergy brand name
Dawnergy’s DA-ODF unit are designed and manufactured according to the international standard and implement such functions as the inlet, fixation, and stripping protection for optical cables, protection for optical fibers storage and management of fiber patch cord, fixed connection and cross connection of optical fibers. Meanwhile, value-added modules such as optical splitter and wavelength division multiplexer can be installed if required by the customer. They can find wide application in optical fiber communication networks and are applicable to central offices and cross-connecting points in an optical access network.
Insulation resistance between grounding device and cabinet ＞ 2x104MΩ/500V(DC)
Withstanding voltage between grounding device and cabinet no less than 3000V(DC)/1min, no breakdown, no flying arc.
Step 1: ODF Unit Installation and fixation on the rack.
Step 2:Open the front door. Pull out the rotating disc from the unit.
Step 3: Lead the patchcord enters the ODF unit and connect to the adapters.
Step 4: Connect and arrange the output patchcord.
Step 5: Push in the rotating disc from the unit and close the front door.
|Disconnection of transmission line or poor transmission effect
|Inappropriate bending radius causes permanent physical deformation to the optical cable/fiber and increases transmission loss
|During construction, the engineering personnel must pay attention to the protection of bending radius of fibers (bends and bottlenecks for cable inlet and outlet in racks) and ensure that the cable routing is reasonable
|Loose connection, great loss of optical fiber active connectors (adapters, pigtails/fiber patch cord)
|Check whether all threaded or plug-in mechanical connectors are firm and meet their respective standards
|Optical fibers are easy to fall off or not reliable
|The most fragile part of the optical fiber/cable lies in the position where abrupt physical structure change happens, which may affect the security and reliability of the entire network
Be careful in cable fixing, stripping protection, secure grounding, and splicing point protection; no error or omission is allowed.
|Redundant fiber storage disorder
|Caused by insufficient cable length in design or careless work of construction personnel
|Sufficient fiber core shall be reserved during product planning. Adjust cables during construction to make cables in the rack clear and neat.
|Disorder caused by the dismantle during construction or maintenance
|Clear labeling and detailed records
In DA-ODF-Unit of products are packed in cartons. Products (including accessories) are packed according to packaging specifications and are damp-proof and shock proof. Accessories and spare parts are placed into respective bags and then placed in the packing box.
After being packed in wooden boxes/cartons, DA-ODF-Unit products can be transported by motor vehicle, train, ship, or airplane. Prevent the products from collision, falling, rain, snow and direct sunshine during transportation.
The DA-ODF-Unit products should be stored in a dry and ventilated warehouse without any erosive gases. The storage temperature should be -25ºC ~ +55ºC.
Contact Us at Any Time