Home
>
products
>
Fiber Optic Management System
>
|
| Place of Origin | China |
| Brand Name | Dawnergy |
| Certification | CE |
| Model Number | DA-FDH-432 |
Dawnergy’s Street Pre-Assigned FDH Cabinet provides an interconnect environment from the feeder network through the passive optical splitter to the distribution network.Designed for rapid PON Network deployments, these cabinets provide a single distribution point, making it the ideal solution for deploying FTTH (fiber-to-the-home) where high potential take rates are expected. Pre-Assigned High Density 1 x 32 Splitters are loaded into the cabinet with a pre-terminated fiber tail, making installation and deployment very cost and time effective.
Features and Benefits
Unique advantages
Short installation time.
Fast connection.
Cables length can be customized before orders.
Investment
• Feeder and Distribution Fiber are pre-terminated into cabinet - No additional splicing required
• High Density Splitters are loaded and pre-assigned into cabinet
• Deployment time is minimized, allowing revenue generating circuits to be turned up immediately
Integrity
• Terminations designed, tested and certified to Telcordia GR-326
• Guarantee: 0.3 dB insertion loss or less, exceeding industry standards
• Fiber cable certified to Telcordia GR-20 and GR-409
• Constructed with Galvanized sheet 2.0mm
• Powder coated for additional protection
• 300 series stainless steel fasteners used on all cabinets
Protection
• Rugged cable clamps protect the OSP cable breakouts from twisting
• Patch only buffer tubes are fully protected with ruggedized, bend-limiting tubing
• High Density Splitters are built with ruggedized jacketing and bend-insensitive 900 um fiber for all input and output pigtails
Access
• Side access door
• Bottom exit/entrance for fiber cables
FDH Cabinet Specifications
| Parameters | Specification |
| Model | DA-OCC-MS-432F |
| Max. No. of Cores | 432 |
| Cable Entrances | 5 |
| Maximum Number of PLC Splitters Modules | 7pcs 1x64 or 14pcs 1x32 |
| Pass Through Capacity | 36 |
| Maximum Output Distribution Patch Panel | 72slots 6F output distribution adapter panels |
| Connector Type | SC/UPC, SC/APC |
| Cable Type | Outdoor Non-armored, Outdoor Armored and Loose Tube |
| Door Lock | 1 per door |
| Cabinet Material | Galvanized sheet 2.0mm |
| Color | RL7035 Gray |
| Base Material | SUS201 2.0mm |
| Thermal Insulation Material | Top cover, front, back and left with thermal insulation cotton |
| Internals Material | 1.2mm cold rolled steel |
| Grounding | With grounding cable and aluminum grounding mark |
| Insulation Resistance (MΩ) | 1000 @500V (DC) |
| Withstanding Voltage (V/min) | 3000 (DC), no breakdown, no flashover |
| Installation Type | Ground |
| Protection Rating | IP65 |
| Operating Temperature (°C) | -40~ +60 |
| Dimensions (mm) | 1028 (H) x 602 (W) x 505 (D) (with base) |
Connection Diagram Inside The FDH
High Density Splitter Modules
The compact yet robust splitters are available in multiple configurations (1x32). Each splitter module features small form connectorized inputs and outputs.
Standard-Performance Devices
| Type | Insertion Loss, Maximum | Return Loss | Directivity | PDL | Uniformity |
| 1x64 Splitter Module | 20.5 | ≥55 | ≥55 | 0.4 | 2.5 |
| 1x32 Splitter Module | 16.5 | ≥55 | ≥55 | 0.3 | 1.5 |
Pre-terminated Feeder and Distribution Fiber Cable (24~432fibers)
Grounding System and Side Access Door
Dimensions (mm)
Ordering Information
Contact Us at Any Time
